| SLP5 6D |
|
|
SLP5-6D Single-mode Test Kit with Wave ID, Set Reference, and Data Storage
The OLS2-Dual features 1310 nm and 1550 nm LASER output from a single output port and is easy to operate. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned. The OPM5-4D offers Wave ID, automatic wavelength identification and switching, when used with the OLS2-Dual light source. Multiple test Tone detection is provided for fiber identification. The OPM5-4D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. Up to 500 records per wavelength of power or insertion loss measurements may be stored in internal non-volatile memory. Using the supplied Windows® compatible software and USB connection, test records may be transferred to a PC for storage, display, analysis, and printing. In addition to being powered by two AA alkaline, the OPM5-4D or OLS2-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM5-4D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM5-4D and OLS2-Dual are fully N.I.S.T. traceable. |
The SLP5-6D test kit combines the OPM5-4D optical power meter and OLS2-Dual LASER light source and is ideally suited for testing single-mode fiber optic networks.| < Prev | Next > |
|---|