| MLP4 2 |
|
|
MLP4-2 Multimode Test Kit with Wave ID and Set Reference
The OLS1-Dual features 850 nm and 1300 nm LED output from a single output port and is easy to operate with only a power button and a wavelength select button. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 3 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, and CW. [Active Output], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned. The OPM4-2D offers Wave ID, automatic wavelength identification and switching, when used with the OLS1-Dual. Multiple test Tone detection is provided for fiber identification. The OPM4-2D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM4-2D or OLS1-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM4-2D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM4-2D and OLS1-Dual are fully N.I.S.T. traceable. |
The MLP4-2 test kit combines the OPM4-2D optical power meter and OLS1-Dual LED light source and is ideally suited for testing multimode fiber optic networks.| < Prev | Next > |
|---|